0102030405
High-Performance Hydraulic Pin Vane Pump for Parker Denison T6GC, T7GB - China Suppliers & Factory Solutions
Model Representation
| T6GC | -B10 | -6 | R | 00 | -A | 1 | 01 |
| Series | Flow code | Shaft type | Rotation | Outlet Positions | Design number | Sealing Level | Port dimensions |
| T6GC | B03, B05, B06, B08, B10, B12, B14, B17, B20, B22, B25, B28, B31 | See size of shaft |
Viewed from shaft end of pump R-right hand for clockwise L-left hand for counter-clockwise |
(Viewed from shaft end of pump) 00-Opposite inlet port 01-Inline with inlet 02-90° CCW from inlet 03-90° CW from inlet |
A |
1-S1, (Buna) NBR Nitrile rubber 5-S5, (Viton) Fluororubber |
00: Flange 1"BSPP 01: SAE Flange SAE 4 bolts(UNC) See installation dimensions |
| T7GB | B02, B03, B04, B05, B06, B07, B08, B10, B12, B15, B20 |
Note: B03 B means the two steering valve plate structure.
The data of relevant series, model are unanimous. Please see T6 series-single pumps data.
Installation Dimensions
T6GC, T7GB
| Oil port | Flange | Install Dimensions(mm) | ||||||
| A1 | B1 | ΦC1 | D1 | T1 Thread | ||||
| T6GC T7GB | P | 01: 1" | F08 | 26.2 | 52.4 | 25.4 | 76.2 | 3/8"-16UNCx19.0 |
| 00: 1"BSPP | - | - | - | 1"BSPP | 79.5 | - | ||
| S | 1-1/2" | F12 | 35.7 | 69.9 | 38.1 | 76.2 | 1/2"-13UNCx22.4 | |
Frequently Asked Questions
Q:
What are the equivalents for this Hydraulic Pin Vane Pump?
This hydraulic pin vane pump is equivalent to the Parker Denison T6GC and T7GB series models.
Q:
What does the "B03 B" flow code represent?
The "B03 B" designation indicates a configuration with a two steering valve plate structure.
Q:
Where can I find the specifications for related series and models?
The data for relevant series and models are unanimous. You can refer directly to the T6 series single pumps technical data.
Q:
What sealing level options are available for these pumps?
Two sealing levels are available: Sealing Level 1 (S1, Buna, NBR Nitrile rubber) and Sealing Level 5 (S5, Viton, Fluororubber).
Q:
What are the rotation options for the T6GC and T7GB series?
When viewed from the shaft end of the pump, the rotation options are "R" for right-hand (clockwise) and "L" for left-hand (counter-clockwise).
Q:
What port dimensions and flanges are supported?
The pump supports Flange 1" BSPP (00) and SAE Flange 4 bolts UNC (01) port dimensions. Please refer to the installation dimensions table for detailed thread and flange sizes.