0102030405
High-Performance Hydraulic Pin Vane Pump for Parker Denison T6gc, T7GB - China Suppliers & Factory Direct
Model Representation
| T6GC | -B10 | -6 | R | 00 | -A | 1 | 01 |
| Series | Flow code | Shaft type | Rotation | Outlet Positions | Design number | Sealing Level | Port dimensions |
| T6GC | B03, B05, B06, B08, B10, B12, B14, B17, B20, B22, B25, B28, B31 | See size of shaft |
Viewed from shaft end of pump R-right hand for clockwise L-left hand for counter-clockwise |
(Viewed from shaft end of pump) 00-Opposite inlet port 01-Inline with inlet 02-90° CCW from inlet 03-90° CW from inlet |
A |
1-S1, (Buna) NBR Nitrile rubber 5-S5, (Viton) Fluororubber |
00: Flange 1" BSPP 01: SAE Flange SAE 4 bolts (UNC) See installation dimensions |
| T7GB | B02, B03, B04, B05, B06, B07, B08, B10, B12, B15, B20 |
Note: B03 B means the two steering valve plate structure.
The data of relevant series and models are unanimous. Please see T6 series-single pumps data.
Installation Dimensions
T6GC, T7GB
| Oil port | Flange | Install Dimensions (mm) | ||||||
| A1 | B1 | ΦC1 | D1 | T1 Thread | ||||
| T6GC T7GB | P | 01: 1" | F08 | 26.2 | 52.4 | 25.4 | 76.2 | 3/8"-16UNCx19.0 |
| 00: 1" BSPP | - | - | - | 1" BSPP | 79.5 | - | ||
| S | 1-1/2" | F12 | 35.7 | 69.9 | 38.1 | 76.2 | 1/2"-13UNCx22.4 | |
Frequently Asked Questions
What does the B03 flow code mean in these vane pumps?
The "B03" flow code, and specifically the "B" designation, refers to the two steering valve plate structure designed for optimal flow control and performance.
Are the T6GC and T7GB equivalent pumps fully interchangeable with Parker Denison originals?
Yes, these equivalent pin-type vane pumps are designed with identical installation dimensions and performance specifications to allow direct drop-in replacement.
What sealing options are available for these hydraulic vane pumps?
Two standard sealing levels are available: Sealing Level 1 uses NBR Nitrile rubber (Buna, S1), and Sealing Level 5 uses Fluororubber (Viton, S5) for high-temperature or chemical compatibility.
How do I determine the rotation direction of the pump?
The rotation is determined by viewing the pump from the shaft end. "R" represents right-hand (clockwise) rotation, while "L" represents left-hand (counter-clockwise) rotation.
What port dimensions are available for the T6GC and T7GB series?
They are available with either code 00 (Flange 1" BSPP) or code 01 (SAE Flange with 4 UNC bolts). Please refer to the installation dimensions table for specific measurements.