High-Performance Hydraulic Pin Vane Pump - China Suppliers and Factory for Parker Denison T6gc, T7GB Equivalent
Model Representation
| T6GC | -B10 | -6 | R | 00 | -A | 1 | 01 |
| Series | Flow code | Shaft type | Rotation | Outlet Positions | Design number | Sealing Level | Port dimensions |
| T6GC | B03, B05, B06, B08, B10, B12, B14, B17, B20, B22, B25, B28, B31 | See size of shaft | Viewed from shaft end of pump R-right hand for clockwise L-left hand for counter-clockwise |
(Viewed from shaft end of pump) 00-Opposite inlet port 01-Inline with inlet 02-90° CCW from inlet 03-90° CW from inlet |
A | 1-S1, (Buna) NBR Nitrile rubber 5-S5, (Viton) Fluororubber |
00: Flange 1" BSPP 01: SAE Flange SAE 4 bolts (UNC) See installation dimensions |
| T7GB | B02, B03, B04, B05, B06, B07, B08, B10, B12, B15, B20 |
Note: B03 B means the two steering valve plate structure.
The data of relevant series, model are unanimous. Please see T6 series-single pumps data.
Installation Dimensions
T6GC、T7GB
| Oil port | Flange | Install Dimensions (mm) | ||||||
| A1 | B1 | ΦC1 | D1 | T1 Thread | ||||
| T6GC T7GB |
P | 01: 1" | F08 | 26.2 | 52.4 | 25.4 | 76.2 | 3/8"-16UNCx19.0 |
| 00: 1" BSPP | - | - | - | 1" BSPP | 79.5 | - | ||
| S | 1-1/2" | F12 | 35.7 | 69.9 | 38.1 | 76.2 | 1/2"-13UNCx22.4 | |
Frequently Asked Questions (FAQ)
Q: What are the equivalent series for the Parker Denison T6GC and T7GB vane pumps?
These hydraulic pin vane pumps are designed as high-quality equivalents to the Parker Denison T6GC and T7GB series, matching their exact installation dimensions, flow configurations, and performance ratings.
Q: What does the "B" denote in the flow code (e.g., B03) for these pumps?
In the model representation, the letter "B" in the flow code indicates the specific two steering valve plate structure utilized within the pump assembly.
Q: What sealing options are available for the T6GC and T7GB equivalent pumps?
Two sealing levels are available: Sealing Level 1 uses Buna (NBR Nitrile rubber) for standard applications, and Sealing Level 5 uses Viton (Fluororubber) for high-temperature or chemical-resistant requirements.
Q: How do I determine the rotation direction of the pump from the model code?
The rotation is determined when viewed directly from the shaft end of the pump. The designation "R" stands for right-hand (clockwise rotation), while "L" stands for left-hand (counter-clockwise rotation).
Q: What port dimensions and mounting flanges are supported?
The pumps support standard port options including 1" BSPP (Code 00) and SAE 4-bolt UNC flanges (Code 01) for the pressure port, alongside standard 1-1/2" F12 flanges for the suction port.