0102030405
China Suppliers Factory Tokimec Equivalent Sqp Series Single Pumps Sqp1 Sqp2 Sqp3 Sqp4 for Low Noise Applications
Model Representation
| (F3-) | SQP2 | -21 | -1 | C | (F) | -(LH) | -18 |
| Infuse front, oil intermiscibility | Series | Displacement code | Shaft type | Outlet positions | Installation type | Rotation | Design number |
|
No-marking: Anti-wear hydraulic oil, Water glycol fluid or water-oil emulsions F3-phosphate ester fluid |
SQP1 | 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 14 |
1-Belt key straight shaft 86-Heavy belt key straight shaft |
(Viewed from cover end of pump) A-Opposite inlet B-90° CCW from inlet C-Inline with inlet D-90° CW from inlet |
No-marking: Flange Mounting F-Foot Mounting |
(Viewed from shaft end of pump) LH-Left hand for counter clockwise No-marking-Right hand for clockwise |
15 |
| SQP2 | 10, 12, 14, 15, 17, 19, 21, 25 | 18 | |||||
| SQP3 | 21, 25, 30, 32, 35, 38, 45 | ||||||
| SQP4 | 42, 45, 50, 57, 60, 66, 75 |
USgpm Flow(USgpm) at 1200r/min and 0.69MPa.
Technical Data
| Series | Displacement code | Geometric displacement (mL/r) | With antiwear hydraulic oil or phosphate ester fluid | With water glycol fluid | With water-oil emulsions | Min. Speed (r/min) | |||
| Max. pressure (MPa) | Max. speed (r/min) | Max. pressure (MPa) | Max. speed (r/min) | Max. pressure (MPa) | Max. speed (r/min) | ||||
| SQP1 | 2 | 7.5 | 13.8 | 1800 | 13.8 | 1200 | 6.9 | 1200 | 600 |
| 3 | 10.2 | ||||||||
| 4 | 12.8 | 17.2 | 15.9 | ||||||
| 5 | 16.7 | ||||||||
| 6 | 19.2 | ||||||||
| 7 | 22.9 | ||||||||
| 8 | 26.2 | ||||||||
| 9 | 28.8 | ||||||||
| 10 | 31.0 | ||||||||
| 11 | 35.0 | ||||||||
| 12 | 37.9 | 15.7 | 13.8 | ||||||
| 14 | 44.2 | 13.8 | |||||||
| SQP2 | 10 | 32.5 | 17.2 | 1800 | 15.9 | 1200 | 6.9 | 1200 | 600 |
| 12 | 38.3 | ||||||||
| 14 | 43.3 | ||||||||
| 15 | 46.7 | ||||||||
| 17 | 52.5 | ||||||||
| 19 | 59.2 | ||||||||
| 21 | 65.0 | ||||||||
| 25 | 79.2 | ||||||||
| SQP3 | 21 | 66.7 | 17.2 | 1800 | 15.9 | 1200 | 6.9 | 1200 | 600 |
| 25 | 79.2 | ||||||||
| 30 | 95.0 | ||||||||
| 32 | 100 | ||||||||
| 35 | 109 | ||||||||
| 38 | 118 | ||||||||
| 45 | 140 | 13.8 | 13.8 | ||||||
| SQP4 | 42 | 134 | 17.2 | 1800 | 15.9 | 1200 | 6.9 | 1200 | 600 |
| 45 | 140 | ||||||||
| 50 | 156 | ||||||||
| 57 | 178 | ||||||||
| 60 | 189 | ||||||||
| 66 | 207 | ||||||||
| 75 | 237 | 13.8 | 13.8 | ||||||
USgpm Flow(USgpm) at 1200r/min and 0.69MPa.
Permit surpassing the top pressure 10% instantaneous pressure, within 0.5 Second.
Permit surpassing the top pressure 10% instantaneous pressure, within 0.5 Second.
Noise Data
Installation Dimensions
Frequently Asked Questions
What fluids are compatible with the Tokimec equivalent SQP series single pumps?
Without special marking, the pumps are compatible with anti-wear hydraulic oil, water glycol fluid, or water-oil emulsions. For phosphate ester fluids, the F3 prefix model should be specified.
What does the displacement code represent in the model representation?
The displacement code indicates the USgpm flow rate of the pump measured at a speed of 1200 r/min and a pressure of 0.69 MPa.
Can the SQP series pumps operate above their maximum rated pressure?
Yes, the pump allows for pressure spikes surpassing the top rated pressure by up to 10% instantaneously, provided the duration does not exceed 0.5 seconds.
How do I determine the rotation direction of the pump?
The rotation direction is determined by viewing the pump from the shaft end. "LH" stands for left-hand (counter-clockwise) rotation, while a lack of marking indicates right-hand (clockwise) rotation.
What installation mounting options are available for these single pumps?
The standard configuration (no marking) is Flange Mounting. If you require Foot Mounting, you should choose the model designation with the letter "F".
What are the minimum and maximum operating speeds for SQP series pumps?
The minimum operating speed for all SQP series (SQP1, SQP2, SQP3, SQP4) is 600 r/min, while the maximum operating speed ranges up to 1800 r/min depending on the fluid type and displacement.